Arc Welding Tips, Tricks and Techniques

Posted September 22nd, 2009 in the Welding category.





This is a preview of an 91 minute professionally produced how-to video titled “HOW TO ARC WELD – TIPS, TRICKS AND PROCEDURES”. New to arc welding? Want to learn basic tips and procedures without taking expensive lessons? Have you been welding for a while but would like to learn from other…

23 Responses to “Arc Welding Tips, Tricks and Techniques”

  1. GunGemini, on September 25th, 2009 at 3:47 pm Said:

    @kiapolo2002

    I just started classes yesterday and the first thing out of my instructors mouth is “We are welding with 6011 cause its harder!! If you can weld with 6011 you can weld with anything!”

  2. kiapolo2002, on September 26th, 2009 at 12:29 pm Said:

    welding is actually a lot easier than i thought it would be when i first started out…7018 electrodes are actually the smoothest rods i have worked with so far…6010’s just look too sloppy in my opinion…but yeah i run on dcep at anywhere between 90 amps and 100 amps and have little problems with sticking…the only position im really bad with is verticals, so next time i get a chance, im going to try it from the angle he was doing them from…might help…

  3. 3blindmicefilms, on September 26th, 2009 at 6:23 pm Said:

    Have you guys seen “You Can’t Weld This!”? It’s pretty funny… The guys over at WeldingMart com had it made! Do a youtube search for it :)

  4. ala4akbar, on September 29th, 2009 at 10:22 pm Said:

    GOD BLESS THIS VIDEO and god bless youtube now imma show my classmate show them weld they’ll be suprised

  5. 2500Jerry, on October 2nd, 2009 at 2:45 pm Said:

    i graduated from yechnical HS and i took welding for 2 years but before then i had been welding since i was little, i prefer stick welding and my teacher recommended me to HIWT, is it better to take the combination class, cause i was looking into just doing pipe in 2G and 5G

  6. MrYacquub1, on October 5th, 2009 at 7:31 am Said:

    i wanna buy this vidoe iam new welder and stading mma welding

  7. mpoT3CHY, on October 7th, 2009 at 9:09 am Said:

    you need to check your ground or move closer to the base, your rod keeps burning out

  8. 1388dimevader, on October 10th, 2009 at 8:22 pm Said:

    stack of dimes is better!!!

  9. melaniew77msn, on October 14th, 2009 at 8:05 am Said:

    I graduated from Hobart Institute of welding technology. If you really need to learn how to weld I recomend attending their Combination structure/pipe progam. With the training I recieved from them I have held jobs welding boiler pipe,heavy equipment , and more repair than I can rember.All code I have ever welded to required 7018 a.k.a. ‘low-hydrogen’ to be run on DCEP meaning Direct Current Electrode Positive. Wonder if that’s why he keeps losing his arc.

  10. imacf90, on October 18th, 2009 at 5:07 am Said:

    he makes it look easy lol

  11. czf21, on October 19th, 2009 at 9:10 am Said:

    i take adv pipe in collage is awsome but man is get’s hot ass hell

  12. mastersniper13, on October 20th, 2009 at 4:31 am Said:

    i am taking a welding class at my highschool

  13. jeffery19677, on October 21st, 2009 at 8:03 am Said:

    Good welding nerds make $100k or better a year. I make $80 and take the winter off.. Whose laughing now.

  14. jeffery19677, on October 24th, 2009 at 6:24 pm Said:

    If you want to be a welding inspector who is respected, you need to learn how to weld and get a few years’s experience. I remember a weld inspector told my my weld wasn’t good enough and I handed him my hood and electrode holder (called a stinger). He looked at me and asked what he was supposed to do with that. I said “Show me what you want.”
    He said “I can’t weld.” I said, “Go away and send a real inspector.”
    He tried to have me fired. Didn’t work. They fired him instead. Every welder laughed..

  15. misarasdaniel, on October 27th, 2009 at 6:39 am Said:

    Mig welding is better Co2

  16. videomandw, on October 27th, 2009 at 11:18 pm Said:

    you can use paypal to purchase this dvd and we do ship overseas.

    thank you,
    david welch
    shining star video prod
    valparaiso, indiana

  17. millerz2, on October 29th, 2009 at 8:26 am Said:

    It would be handy

  18. jerjerjer20, on November 1st, 2009 at 7:09 pm Said:

    if i want to be a welding inspector should i know how to weld?

  19. rickb731, on November 3rd, 2009 at 3:41 am Said:

    yes because your going to come across a welder
    who is going to call you on your bs esp. if he is an ironworker you better know your shitand be able to back it up

  20. changmappgas, on November 4th, 2009 at 2:56 pm Said:

    We are pleased to see your company information on webiste and found that you are dealing with MAPP GAS business at your market.
    Here we would like to introduce factory and MAPP GAS for your good understanding.Regarding our MAPP GAS, we start to investigate and manufacture since 2004.We sell to oversea market on 2005 when we got the professional office examination.
    Here I will let you know some specification of our MAPP GAS,

  21. changmappgas, on November 6th, 2009 at 10:17 pm Said:

    For MAPP GAS OF CYL,We authorized to air plain manufacture for welding our bottle to ensure gas will not leakage. The thread of MAPP GAS CYL has  standdard size of CGA600,botte size are 75mm dia, 267 height. Portable soldering for using. 
    As for our MAPP GAS, Our burning temperature can be reached 1200oC under condition of  anaerobic combustion welding. our MAPP GAS of burning time can be gottten 2hours and 40mins continuance.

  22. changmappgas, on November 9th, 2009 at 12:41 am Said:

    We are exporting USA and south America since 2006.and have a good maket already.we are going to plan to develop  and enlarge your maket under our close cooperation ,passed quality and reasonable price.

  23. coilgunner2, on November 10th, 2009 at 4:39 pm Said:

    I really want to buy this video! The welder kinda reminds me of Cheech lol from Cheech and chong. But yeah this looks like its defiantly its moneys worth.

Leave a Reply

<< >>